鋁箔分卷機,Aluminum Foil Separator

1)Aluminum Foil Separator鋁箔分卷機

1.This Paper Analyzes The Problems Inducing Quality Defects In Course Of Operating The Aluminum Foil Separator,Discusses The Relevant Methods For Improvement.針對國產鋁箔分卷機在使用過程中存在的問題,分析導致產品質量出現缺陷的原因,就有關改進方法進行探討。

2)Foil Separater鋁箔分切機

1.Three Main Problems About Electrical Control System Of Foil Separater And Slitter Were Analysed.分析了鋁箔分切機和鋁箔剪切機電控系統設計中的三個主要問題：機列張力形成方式的選擇，卷取張力控制方法的選擇，卷徑的測算。

3)Aluminum Foil Coil鋁箔卷

英文短句/例句

1.Repeat Process To Make The Second Packet.按照以上方法重復制作另一個鋁箔卷。

2.Aluminium Foil :Aluminium Sheet Or Coil Rolled To A Thickness Of Less Than 0.15mm.鋁箔：軸壓至小于0.15毫米厚的鋁片或鋁卷。

3.Study On Technology Of Radiator-Fin Made Of Foil Of Automobile Air Condition Produced By 3003 Aluminum Alloy Cast-Rolling Roll3003鋁合金鑄軋卷生產汽車空調散熱器翅片用箔的工藝研究

4.Poly-Cello Laminated Paper Or Foil For Flexible Package.保麗紙及袋、鋁箔袋

5.Hot Stamping FoilGB/T10456-1989電化鋁燙印箔

6.Aluminium Foil For General PurposeGB3198-1996工業用純鋁箔

7.Note: The Hydrophilic Coating Base Material Is Executed By The Aluminium Foil Used For Air Conditions.說明：親水涂層鋁箔的基材按空調器用鋁箔執行。

8.The Optifoil Concept-A Foil Minimill;最優化鋁箔廠──建設新鋁箔廠的最佳選擇

9.Packing: Vacuum-Packed With Aluminum Foil. 1kg Per Package.包裝：鋁箔真空包裝，1公斤/袋。

10.Wrapping Aluminium Foil Round A Joint Allows The Meat To Cook In Its Own Juice/Juices.用鋁箔把肉包住使之在原汁中烹制.

11.Aluminium Foil For Power CapacitorsGB/T3616-1991電力電容器用鋁箔

12.Aluminium Foil For Electrolytic CapacitorGB/T3615-1983電解電容器用鋁箔

13.Measuring Thickness Of The Aluminium Foil--Weighing MethodGB/T6608-1986鋁箔厚度的測定稱量法

14.Manufacturing The High Temperature Resistance Of Print Ink耐高溫藥用鋁箔包裝印刷油墨的開發

15.Study On Microstructures And Mechanical Property Of Al0.2Mn0.3Fe Wing-Foil;Al0.2Mn0.3Fe翅片鋁箔的組織和性能研究

16.Investigations On The Technical Processes And Cube Texture In Anode Aluminum Foil;陽極鋁箔工藝過程和立方織構的研究

17.Preparation And Research Of New Nano-Sized Hydrophilic Aluminium Foil Materials;新型納米親水鋁箔涂覆材料制備研究

18.Investigation On The Microstructure Of Sheets Of Hot Roll Aluminium Foils And Cast-Rolling Aluminium Foils For 1235;1235鑄軋和熱軋鋁箔毛料組織研究

相關短句/例句

Foil Separater鋁箔分切機

1.Three Main Problems About Electrical Control System Of Foil Separater And Slitter Were Analysed.分析了鋁箔分切機和鋁箔剪切機電控系統設計中的三個主要問題：機列張力形成方式的選擇，卷取張力控制方法的選擇，卷徑的測算。

3)Aluminum Foil Coil鋁箔卷

4)Aluminium Foil Mill鋁箔軋機

1.The Fatigue Failure Of Working Roller In Aluminium Foil Mill Was Ana1ysed.對使用中的鋁箔軋機工作輥產生疲勞破裂的因素進行了分析。

2.The Life Of Double-Column Angular Contact Thrust Ball Bearing Is Very Lower And It Was Easily Damaged Owing To Superheat On Operation Side Of The Work-Roll In 2350 High Speed Aluminium Foil Mill, Which Was Generated By Oversize Axial Force And Castastrophic Non-Axial Load.某公司２３５０高速鋁箔軋機操作側止推雙列角接觸球軸承壽命低、易燒熔，其原因是過大的軸向力及嚴重偏載。

5)Foil Mill鋁箔軋機

1.The Influence Of Foil Mill Accuracy On Strip Flatness;鋁箔軋機的精度對板帶平直度的影響

6)Foil Rolling Mill鋁箔軋機

1.In Practical Production,It Is Easy To Take Place The Fire And Equipment Accidents Due To Super Temperature Of Work Roll Bearings Box In Aluminum Cold Rolling Mill And Foil Rolling Mill.實際生產中鋁帶材冷軋機和鋁箔軋機易于發生由于工作輥軸承箱溫度過高而造成的火災和設備事故。